DELTA C-SHAPE technology design offers unmatched stability and steering response when fully de-powered, with the possibility of connecting the front lines higher on the leading edge of the kite.
Once the kite is sitting with the leading edge flat on the water, its C-Shape associated with the Delta Pivot allows the kite to automatically roll over onto one wing tip.
Our fast inflation & deflation valve.
TECHNOFORCE™ of TEIJIN is a high density Polyester fabric with a tear stopping structure using thin and high tension yarn.
Kites with extended de-power ranges sustain more pressure across the canopy as they experience an increased frequency of use over a wider wind range.
BACK LINE TUNING
How to adjust the settings
Stronger assembly of the panels: they are now glued and sewn together to make the canopy more rip resistant.
STREAMLINED LEADING EDGE END TIPS
The leading edge tips benefit from a reduced diameter, they are streamlined to lower the drag and equipped with a strap to avoid bridle tangling
VERTICAL STRUT CUT
The kite's struts are designed with a vertical cut in order to optimize the strength / diameter ratio.
Pulley structure is extremely resistant.
KEVLAR® REINFORCEMENT ON LEADING EDGE
Most seams on the leading edge are protected with an abrasion-resistant Kevlar® fabric to prevent the seams from deteriorating when the kite's profile is subjected to aggressive ground friction
ONE PUMP COLLAR VALVE
Easier to remove and put back.
Convenient for bladder replacement.
We have worked on a bridal system for the new BANDIT. The Spider bridle is a multi point of connection well dispatched along the leading edge which offers a better control of the arc of the kite during the flight. The stability in all wind conditions is very impressive and pushes the high wind range to incredible limits.
TEIJIN 130G DACRON RIPSTOP
We have built our kites for 20 years in the most state-of-the-art cloth from Teijin’s factory in Japan.
They have developed the best technologies and quality material for our kites over the years. Teijin has worked on a few major developments with the double Ripstop on the canopy cloth and durability treatments.
The kite industry was lacking choice of cloth density. We could build kites with a 52 gr per square meter for the canopy and about 160 gr for the leading edge, strut and reinforcements. Having only two choices was not easy because on some parts the 52 gr was too light and the 160 gr too heavy.
After developments and tests with Teijin we can now use a new Dacron 130 gr double Ripstop on our 2020 kites.
By using that new 130 gr cloth, we have saved weight while keeping an excellent strength. The new BANDIT is more reactive and of course feels lighter, which is particularly important for the bigger sizes, in the light wind or for the turning speed during kiteloops.